Is your Air conditioner not working? It is not mandatory to hire an expert to assist you to fix your air conditioner. You can perform air conditioner troubleshooting yourself. Here are some of the best air conditioning troubleshooting tips for beginners.
Troubleshooting tips
Air condenser is not running
There is no reason to panic if the condenser of your A/C is not working. You should start by checking the power to ensure that the unit is plugged in. In case it is fine then you should find out whether the fuse or tripped circuit breaker has blown. You can restore the unit’s power and confirm whether it is going to work again. Another possible problem can be the thermostat.
Examine whether the thermostat of the device is set in the right manner. Try lowering the thermostat by at least five degrees and see whether it will kick on or not. If it does not then the issue is likely to be the compressor or motor the unit. The repair of a condenser requires an expert. You can get in touch with a repair expert near your to come to your rescue if all these attempts fail to work for you.
Poor air cooling
If the unit does not seem to cool the air as you expect from it ten, you should start by lowering its thermostat at an angle of five degrees. If this does not make the device to start work properly, check with the evaporator has dirt. Clean the evaporator with a lot of care and then allow it to run for some hours. If the condition is going to persist, then it implies that the air conditioner is improperly sized. A scalding day is among the possible causes of your device’s ineffectiveness. It is not easy to attain over 62 degrees if the outside temperatures are above 100 degrees. This will be more difficult if your house has an extra number of windows. It is wise to consult a professional before you determine whether you can replace your air conditioner or not if the temperatures keep rising beyond the expected levels from time to time.
Unit is not cooling at all
When the device is not cooling, you should begin by checking at the thermostat to ensure that it is working. Next, you can look at the condenser to determine whether it has accumulated dirt or it is blocked. If dirty then you should clean the same. Again if none of these works, the only thing you will be left with is hiring an expert.
